SS2376 Duplex stainless steels have a two-phase microstructure of austenite and ferrite grains. The duplex structure gives this family of stainless steels a combination of attractive properties:
Strength: Duplex stainless steels are about twice as strong as regular austenitic or ferritic stainless steels.
SS2376 Stainless Steel Chemical Composition | |||||||
Chemical Composition | C | Si | Mn | P | S | Cr | Ti |
Standard | ≤0.03 | ≤0.80 | ≤1.20 | ≤0.035 | ≤0.020 | 24.0-26.0 | 0.2+4(C+N)~1.0 |
General | 0.008 | 0.18 | 0.2 | 0.020 | 0.001 | 17.50 | 0.3 |
Distinction | Physical Performance | |||
Ys(Mpa) | Ts(Mpa) | El(%) | Hv | |
Standard | ≥240 | ≥450 | ≥22 | - |
General | 550 | 430 | 32 | 150 |
Physical Performance | ||||
Density(g/cm) | Magnetism | Specific heat | Heat conductivity | Coefficient of thermal expansion |
7.7 | Yes | 460 | 26.4 | 10.5 |
SS2376 Stainless Steel Characteristics:
High resistance to stress corrosion cracking (SCC) in chloride-bearing environments
Good resistance to general corrosion and pitting
High mechanical strength – roughly twice the proof strength of austenitic grades
Good resistance to erosion corrosion and corrosion fatigue
Physical properties that present design advantages
Good weldability
SS2376 Stainless Steel Application:
It is used for heat exchangers and coolers and devices in oil refining, fertilizer, papermaking, petroleum and chemical industries.
Spot delivery, including delivering small batches of goods
Provide wide-range and complete materials series products
Cutting plates, including complex shapes of materials and special processing and disposal
Cutting bars and strips
Our application technology expert provide the best material and recommendation
One-stop service